liquor dispenser
Refill Instructions
Step 1:
Remove the liquor dispenser from the wall mounted base by grabbing the copper pipe above the ball valve and lifting up off the cleat.
Step 2:
Lay the liquor dispenser down and remove the screws for the clamp at the bottle neck. Support the bottle when screws are loose.
Step 3:
Gently pull the bottle away from the dispenser while holding the dispenser above the ball valve at the rubber seal.
(twist slightly if needed)
Refill the bottle or use the exact same bottle brand and size.
Each liquor dispenser is only designed to work with a certain bottle shape. Other bottles may work if they have a similar neck size.
Note:
Add a light coat of vegetable oil to the rubber part that goes in the bottle.
This will help when removing the bottle for the next refill. The oil does not come in contact with the liquor, so there will be no effect on the liquor taste.
Step 4:
Place the full bottle on a solid surface and gently lower the dispenser down into the bottle. Push dispenser down until rubber is fully seated on the bottle neck glass.
Step 5:
Align the clamp and gently tighten the screws until bottle is firmly held in place. Do not over tighten screws or bottle may break.
Important! Before the next step - Close the ball valve !
Step 6:
With the ball valve closed, quickly invert the liquor dispenser.
Lower onto wall mount and enjoy!
